Stepped shank –
for slotting and drilling in Aluminium and UPVC-profiles.
-used on CNC-machining-centres:
elumatec, Emmegi, Haffner, Handtmann, HEFI, MLA, Pertici, Pressta-Eisele, Rapid,
Rotox, Schirmer, Schüco, Striffler, TEKNA, Wegoma, etc.
-speed approx. 8.000 – 30.000 rpm
-direct and adequate cooling-spray is particulary important for aluminium working !
For working of aluminium- and UPVC profiles
| Part No. | D | B | A | C | E | |
|---|---|---|---|---|---|---|
| JT010711010 | 100 | 20 | 10 | 70 | 10 | |
| JT010712012 | 100 | 20 | 12 | 70 | 12 | |
| JT010716016 | 100 | 30 | 16 | 50 | 16 | |
| JT010718008 | 100 | 16 | 8 | 70 | 8 | |
| JT010718305 | 100 | 30 | 5 | 50 | 8 | |
| JT010718355 | 100 | 30 | 5 | 60 | 8 | |
| JT010718405 | 100 | 40 | 5 | 50 | 8 | |
| JT011710010 | 110 | 15 | 10 | 65 | 10 | Schüco |
| JT070714032 | 70 | 12 | 3.2 | 40 | 4 | |
| JT070718007 | 70 | 18 | 7 | 45 | 8 | |
| JT070718008 | 70 | 16 | 8 | 40 | 8 | |
| JT077716005 | 77 | 8 | 5 | 40 | 6 | Schüco |
| JT077716006 | 77 | 10 | 6 | 40 | 6 | Schüco |
| JT080718004 | 80 | 15 | 4 | 35 | 8 | |
| JT080718005 | 80 | 16 | 5 | 35 | 8 | |
| JT080718006 | 80 | 20 | 6 | 35 | 8 | |
| JT080718008 | 80 | 10 | 8 | 40 | 8 | Schüco |
| JT090718005 | 90 | 20 | 5 | 45 | 8 | |
| JT090718006 | 90 | 20 | 6 | 30 | 8 | |
| JT090718355 | 90 | 35 | 5 | 55 | 8 |
